Diseño de un TAG RFID pasivo usando fractales
Radio frequency identification tags, also known as RFID tags that currently exist can cause discomfort to users, due to the cost of having a passive RFID tag that uses an integrated circuit for their correct operation, in addition, the sizes of some of these tags whose dimensions are not adequate to...
Guardado en:
Autor Principal: | |
---|---|
Otros Autores: | |
Formato: | Tesis de Pregrado |
Publicado: |
Quito: Universidad de las Américas, 2017
2018
|
Materias: | |
Acceso en línea: | http://dspace.udla.edu.ec/handle/33000/8319 |
Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
id |
ir-:33000-8319 |
---|---|
recordtype |
dspace |
spelling |
ir-:33000-83192019-03-19T16:18:35Z Diseño de un TAG RFID pasivo usando fractales Pazmiño Sosa, Erick Santiago Vásquez Peralvo, Juan Andrés IDENTIFICACIÓN POR RADIOFRECUENCIA CIRCUITOS INTEGRADOS Radio frequency identification tags, also known as RFID tags that currently exist can cause discomfort to users, due to the cost of having a passive RFID tag that uses an integrated circuit for their correct operation, in addition, the sizes of some of these tags whose dimensions are not adequate to fit the pocket of their users. This study is focused on the design of a radio frequency identification tag (RFID), which will be passive, and will eliminate the integrated circuit that the tags currently have. For this, the fractal structures will be used in order to obtain an antenna that can be coupled inside an RFID tag. These fractal structures will also help reduce the sizes of the tags that currently exist. The process that will be used in order to fulfill the focus of this work consists of three important parts, which are: fractal antenna design, antenna simulation and analysis of the results obtained. Las etiquetas de identificación por radio frecuencia, también conocidas como tags RFID que existen en la actualidad pueden causar malestar a los usuarios, debido al costo que representa tener un tag RFID pasivo que utilice un circuito integrado para su correcto funcionamiento, además, de los tamaños de algunas de estas etiquetas cuyas dimensiones no son adecuadas para poder adaptarse al bolsillo de sus usuarios. Este estudio está enfocado en el diseño de una etiqueta de identificación por radio frecuencia RFID, la misma que será pasiva, además eliminará el circuito integrado que poseen los tags actualmente. Para esto, se utilizarán las estructuras fractales a fin de obtener una antena que pueda acoplarse dentro de un tag RFID. Estas estructuras fractales también ayudarán a reducir los tamaños de las etiquetas que existen actualmente. El proceso que se utilizará a fin de cumplir el enfoque de este trabajo de titulación consta de tres partes importantes, las cuáles son: el diseño de la antena fractal, la simulación de la antena y el análisis de los resultados obtenidos. 2018-02-06T23:11:21Z 2018-02-06T23:11:21Z 2017 bachelorThesis Pazmiño Sosa, E. S. (2017). Diseño de un TAG RFID pasivo usando fractales. (Tesis de pregrado). Universidad de las Américas, Quito. UDLA-EC-TIERI-2017-38 http://dspace.udla.edu.ec/handle/33000/8319 spa openAccess Atribución-NoComercial-SinDerivadas 3.0 Ecuador http://creativecommons.org/licenses/by-nc-nd/3.0/ec/ 92 p. application/pdf Quito: Universidad de las Américas, 2017 |
institution |
UDLA |
collection |
Repositorio UDLA |
universidades |
UDLA |
language |
|
format |
Tesis de Pregrado |
topic |
IDENTIFICACIÓN POR RADIOFRECUENCIA CIRCUITOS INTEGRADOS |
spellingShingle |
IDENTIFICACIÓN POR RADIOFRECUENCIA CIRCUITOS INTEGRADOS Pazmiño Sosa, Erick Santiago Diseño de un TAG RFID pasivo usando fractales |
description |
Radio frequency identification tags, also known as RFID tags that currently exist can cause discomfort to users, due to the cost of having a passive RFID tag that uses an integrated circuit for their correct operation, in addition, the sizes of some of these tags whose dimensions are not adequate to fit the pocket of their users. This study is focused on the design of a radio frequency identification tag (RFID), which will be passive, and will eliminate the integrated circuit that the tags currently have. For this, the fractal structures will be used in order to obtain an antenna that can be coupled inside an RFID tag. These fractal structures will also help reduce the sizes of the tags that currently exist. The process that will be used in order to fulfill the focus of this work consists of three important parts, which are: fractal antenna design, antenna simulation and analysis of the results obtained. |
author2 |
Vásquez Peralvo, Juan Andrés |
author_facet |
Vásquez Peralvo, Juan Andrés Pazmiño Sosa, Erick Santiago |
author |
Pazmiño Sosa, Erick Santiago |
author_sort |
Pazmiño Sosa, Erick Santiago |
title |
Diseño de un TAG RFID pasivo usando fractales |
title_short |
Diseño de un TAG RFID pasivo usando fractales |
title_full |
Diseño de un TAG RFID pasivo usando fractales |
title_fullStr |
Diseño de un TAG RFID pasivo usando fractales |
title_full_unstemmed |
Diseño de un TAG RFID pasivo usando fractales |
title_sort |
diseño de un tag rfid pasivo usando fractales |
publisher |
Quito: Universidad de las Américas, 2017 |
publishDate |
2018 |
url |
http://dspace.udla.edu.ec/handle/33000/8319 |
_version_ |
1634990563925164032 |
score |
11,871979 |